Unveiling the impact of laser power variations on microstructure, corrosion, and stress-assisted surface crack initiation in laser powder bed fusion-processed Ni-Fe-Cr alloy 718

Abstract

Corrosion and stress-corrosion related failures often compromise the integrity of critical metallic components during their service, raising significant concerns. It is crucial to comprehend the crack initiation mechanism and the impact of alloy microstructure on this crack initiation process. It is known that the introduction of unique microstructures through metal additive manufacturing brings new challenges. This study aims to investigate, for the first time, the effects of microstructural alterations resulting from fluctuations in laser power during laser powder bed fusion on the surface cracking initiation mechanism and electrochemical behaviour of Ni-Fe-Cr alloy 718, which is widely used in applications that require exceptional strength and corrosion resistance. To carry out this investigation, microcapillary electrochemical methods were combined with high-resolution techniques (TEM, SEM, AFM). The findings emphasize the existence of an optimal range of process parameters that effectively mitigate corrosion and crack initiation susceptibility. This work demonstrated that slight deviations in laser power from this optimal value result in diverse alterations at the micro and submicron scales. These alterations include increased subgrain width, porosity, dislocation density, density of nanovoids, and distribution of carbides. Importantly, these changes, particularly in dislocation and nanovoid densities caused by minor variations in process parameters, significantly affect the material's susceptibility to corrosion initiation and stress-assisted surface cracking.