Abstract

Grain size effect on trace metals (cadmium, copper, lead, zinc, and iron) and total organic content distribution in various fractions (<0.063, 0.063–0.105, 0.105–0.250, 0.250–0.500, and 0.500–1.000 mm) of contaminated sediment has been studied. Selective partitioning of the studied contaminants in sediment fractions was observed, with a minimum content in the fine sand fraction of grain size 0.125–0.250 mm. Anomalously high concentrations of trace metals and organic matter content in the medium and coarse sediment fractions (>0.250 mm) was explained by the formation of large agglomerates (clusters) during the generally recommended drying procedures. These large agglomerates, formed from smaller sediment fraction particles enriched by various contaminants kept on their large specific area by adsorption forces, have been observed in photographs of the medium and coarse sediment fractions only. The formed agglomerates consist of small particles cemented either by dissolved organic matter or by sea salts present in the marine sediment. The formation of such agglomerates should be taken into consideration when conducting metal contamination studies on sediments.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.