Abstract
Four ultrasonic anemometers have been used to measure flow velocities at two groups of positions at mid-height on a 6 m cube. One other ultrasonic anemometer, located upstream at cube height, provided reference wind data. The results obtained provide a picture of the mean and fluctuating parts of the flow. Mean velocity results indicate that with the wind perpendicular to one face, the flow detaches at the windward edge but is reattached to the sides by about x/ h=0.83. However, probability analysis shows that the velocity at this point is reversed for 54% of the time. In addition it is shown that while some of the fluctuations can be attributed to a quasi-steady response to variations in wind direction, the influence of building-induced turbulence is also very apparent. These results illustrate the highly turbulent and unsteady nature of flow on the sides of the cube.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Wind Engineering and Industrial Aerodynamics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.