Abstract
A process for universal rapid demulsification by vacuum suction using an as-prepared superamphiphilic and underliquid superamphiphobic polyurethane (PU)/diatomite composite has been developed and is used to demulsify kerosene-in-water and water-in-kerosene emulsions with and without a surfactant. The results show that the demulsification rate of all the emulsions exceeds 98.5% in long-term operation, with a stable demulsification speed exceeding 0.303 L/m2 min. When a superhydrophobic channel for separation is added, the oil/water separation efficiency exceeds 99.0%, and the final products are qualified oil and water. This attractive universal demulsification capability of PU/diatomite originates from its underliquid superamphiphobicity, which attracts a continuous phase to form a stable liquid film and thus repels dispersed phase droplets, which have a similar interaction with the surface but are much less abundant. The vacuum forces emulsion droplets into the microstructure of the PU/diatomite cake, where they are compressed, coalesce, and finally demulsified. This observed mechanism suggests a promising strategy to avoid the negative effects of oil fouling in demulsification and achieve large-scale universal continuous rapid demulsification.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
