Abstract
The total unit weight of waste in a 40.5 ha landfill, up to 34 m thick, was estimated based on tube samples taken from borings made using sonic drilling technology. The waste’s unit weight was needed for input into slope stability calculations, which were part of the landfill’s closure design. The sonic drill was capable of penetrating and obtaining samples of all types of materials in the landfill. No significant correlation of waste unit weight, with depth, was found. Instead, the waste samples’ constituents were observed to have the greatest effect on their unit weights. The site also offered the unique opportunity to back-calculate the waste’s overall unit weight using a numerical model, and knowledge of the in situ stresses in the underlying clay as determined by oedometer testing. These calculations indicated that samples taken, using sonic drilling, gave a good a approximation of the waste’s overall unit weight at each boring location.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Geotechnical and Geoenvironmental Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
