Abstract
This paper considers the elastic unilateral buckling of rectangular mild steel plates that are restrained elastically and subjected to bending and axial actions. A variational formulation of the Ritz method using linear combinations of harmonic functions for the buckling deformations is used to establish an eigenproblem to determine the plate local buckling coefficients. The motivation for the study is the retrofit of reinforced concrete beams by gluing and then bolting steel plates to the sides of the beam. Such plates, when acting compositely with the concrete beam, are subjected to predominantly bending and axial actions which may cause unilateral local buckling. Whereas the bolts provide complete restraint against buckling at discrete points, the glue may also inhibit local buckling between these nodal points since it acts as a continuous elastic restraint. The influence of the glue stiffness, support conditions and plate proportions on the unilateral buckling of such plates are assessed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.