Unified fractional step method for Lagrangian analysis of quasi‐incompressible fluid and nonlinear structure interaction using the PFEM

Abstract

SummaryThe fractional step method (FSM) is an efficient solution technique for the particle finite element method, a Lagrangian‐based approach to simulate fluid–structure interaction (FSI). Despite various refinements, the applicability of the FSM has been limited to low viscosity flow and FSI simulations with a small number of equations along the fluid–structure interface. To overcome these limitations, while incorporating nonlinear response in the structural domain, an FSM that unifies structural and fluid response in the discrete governing equations is developed using the quasi‐incompressible formulation. With this approach, fluid and structural particles do not need to be treated separately, and both domains are unified in the same system of equations. Thus, the equations along the fluid–structure interface do not need to be segregated from the fluid and structural domains. Numerical examples compare the unified FSM with the non‐unified FSM and show that the computational cost of the proposed method overcomes the slow convergence of the non‐unified FSM for high values of viscosity. As opposed to the non‐unified FSM, the number of iterations required for convergence with the unified FSM becomes independent of viscosity and time step, and the simulation run time does not depend on the size of the FSI interface. Copyright © 2016 John Wiley & Sons, Ltd.