Abstract

The undrained cyclic behaviour of clay under three-dimensional (3D) stress states is vital in marine geotechnical applications, especially in relation to deformation and stability issues of pile foundations under oceanic environmental loadings. However, investigations of the 3D cyclic behaviour of clay are rarely undertaken in the laboratory. This paper presents an experimental study on the undrained 3D responses of clay performed with a true triaxial apparatus, where horizontal one-way and vertical two-way cyclic stresses are applied to the specimen simultaneously. Emphasis is placed on the effects of different combinations of horizontal and vertical stresses on the behaviour of strain, pore water pressure, mobilised friction and modulus. Test results indicated that cyclic behaviour strongly depended on the 3D stress conditions or stress paths. By introducing a new cyclic stress ratio (CSRA), it was demonstrated that the cyclic shakedown behaviours of clay could be made independent of stress paths. An allowable CSRA, acting as a cyclic stress boundary ratio, was established at 0·08. Interestingly, an increase in the modulus of clay was observed during cyclic loading. This phenomenon contradicted the typically observed modulus degradation of clay under undrained cyclic loadings, adding a new perspective to our understanding of the material's behaviour.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.