Understanding Why Adhesion in Extrusion Coating Decreases With Diminishing Coating Thickness

Abstract

It is well known that in extrusion coating, the coating adhesion to the substrate decreases with decreasing thickness. The study on this phenomenon is divided into three parts. Part I explores the reduction in adhesion of LDPE to paper and other porous substrates. Several hypotheses are proposed for the origin of this decrease, including a reduction in oxidation time, faster cooling in the air gap, and more rapid quenching in the nip. A model of the molten polymer penetration into the substrate shows that the greatest effect is cooling in the nip; thinner coatings have less time to flow into the substrate interstices once the chill roll contact is made. The model results agree well with experimental adhesion data from the literature. In Part II, adhesion to aluminum foil and other nonporous substrates is studied. Several hypotheses are proposed for why peel strength decreases in these structures, including a reduction in the air gap time, faster air gap cooling, more rapid nip quenching, and stress imposed during drawing. Modeling and experimental results show that cooling in the nip and imposed stress have the greatest impact. In Part III, the peel test is analyzed to understand why the peel strength of better adhering adhesives are more sensitive to changes in coating thickness. The analysis shows that changes in the critical dimension of the deformation region at the peel front may be responsible.