Abstract
To investigate the role of the anode on the polarization losses of a High-Temperature Polymer Electrolyte Membrane Fuel Cell (HT-PEMFC), we analyzed impedance data using the Distribution of Relaxation Times (DRT) method. Thereby, we varied the operating conditions of the anode (humidification, nitrogen dilution, and carbon monoxide (CO) impurities) to study its impact on Nyquist plot and DRT spectrum. Humidification of the hydrogen was found to dilute phosphoric acid, which is visible in the DRT. Nitrogen dilution of the anode gas slightly increases the Mass Transport (MT) resistance. Furthermore, CO was added to anode gas fed and it impacts the impedance throughout the whole frequency range, specifically the medium and low-frequency range, typically assigned to ORR kinetics and oxygen MT. For a more detailed analysis of the impedance data, a reference electrode was employed to separate the overpotential caused by each electrode. The DRT spectrum of the anode exhibits only one peak at 1 kHz. In the presence of CO, a second peak arises corresponding to side-reactions occurring as the anodic half-cell potential increases. It was found that the cathode is affected by CO on the anode merely by the lowered cell potential and not by CO directly.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.