Understanding the role of polyurethane sponges on rapid formation of aerobic granular sludge and enhanced nitrogen removal

Abstract

Long formation time and limited simultaneous nitrification–denitrification (SND) are still the problems for aerobic granular sludge (AGS) application. This study presents a novel strategy to simultaneously promote sludge granulation and enhance nitrogen removal. This new approach consists of adding polyurethane sponges (PUS) and applying intensive aeration periodically. To demonstrate the effectiveness of this strategy and understand the role of PUS, two sequencing batch reactors (R1: without PUS; R2: PUS addition) were used. The results show that the granulation time in R2 (14 days) was much shorter and the nitrogen removal (80.7 %) was much higher when compared to the R1 (75 days and 64.8 %). Biofilm was rapidly formed on PUS because of the porous network structure, resulting in the low suspended biomass concentration. Thus, a close to discrete non-flocculent settling type was created, which promoted the selection of well-settling aggregates rapidly and efficiently. Meanwhile, biofilm was detached from PUS by intensive aeration, providing the nucleus (fragments of biofilm) in-suit for microbial adhesion. Under the combined effects, the aerobic granulation process was significantly accelerated. The total biomass amount was maintained during initial granulation because of the rapid biofilm formation, resulting in the stable removal of NH4+-N at a rapid start-up period. The rapid formation of biofilm and fast granulation created more anoxic zones during aeration and thereby enhanced SND. The biofilm formation also increased the relative abundances of aerobic denitrifiers (Dokdonella and Denitratisoma), autotrophic denitrifiers (Sulfuritalea), and hydrolytic/fermentativebacteria (Ferruginibacter, Opitutus, and Lactobacillus), which enhanced the SND performance and endogenous denitrification.