Understanding the Mechanism of Strong Mining Tremors near the Goaf Area of Longwall Mining: A Case Study

Abstract

Strong mining tremors (SMTs) frequently occur in super-thick strata near the goaf when mining. Since 2021, there have been three consecutive SMTs with magnitude greater than 2.0 in longwall 1208 of the Shilawusu Coal Mine. These SMTs caused mine production to be suspended for more than 290 days and affected over 100 households located on the shaking ground, and seriously threatened the safety of underground workers and restricted production capacity. Therefore, it is essential to investigate the occurrence mechanism of SMTs in super-thick strata goaf mining in order to understand the phenomenon, how the disaster of mining tremors occurs, and the prevention and control of mining tremor disasters. In this study, field observation, numerical analysis, and theoretical calculation were used to study the occurrence mechanism of three SMTs in the Shilawusu Coal Mine. The results show that the super-thick strata fracture induced by the SMTs is generally higher by one to three orders of magnitude in some of the source mechanical parameters compared to other mining tremors, and so is more likely to cause ground shaking. Field observations revealed that before and after the occurrence of SMTs, the maximum surface subsidence suddenly increased by about 0.1 m and showed a “stepped” increase, and the super-thick strata began to experience fractures. The following theoretical mechanics model of super-thick strata was established: at the goaf stage of mining, with the increase in the area of the hanging roof, the super-thick strata will experience initial and periodic fractures, which can easily induce SMTs. The relative moment tensor inversion method was used to calculate the source mechanism of SMTs, which was found to be caused by the tensile rupture resulting from the initial and periodic ruptures of super-thick strata, in addition to the shear rupture generated by the adjustment of unstable strata structures. As the mining continues on the longwall face, there is still a possibility of SMT occurrence. This paper provides some insights into the mechanism and prevention of SMT in underground coal mines.