Abstract

Lipid nanoparticles (LNPs) or liposomes are the most widely used drug carriers for nanomedicines. The size of LNPs is one of the essential factors affecting drug delivery efficiency and therapeutic efficiency. Here, we demonstrated the effect of lipid concentration and mixing performance on the LNP size using microfluidic devices with the aim of understanding the LNP formation mechanism and controlling the LNP size precisely. We fabricated microfluidic devices with different depths, 11 μm and 31 μm, of their chaotic micromixer structures. According to the LNP formation behavior results, by using a low concentration of the lipid solution and the microfluidic device equipped with the 31 μm chaotic mixer structures, we were able to produce the smallest-sized LNPs yet with a narrow particle size distribution. We also evaluated the mixing rate of the microfluidic devices using a laser scanning confocal microscopy and we estimated the critical ethanol concentration for controlling the LNP size. The critical ethanol concentration range was estimated to be 60–80% ethanol. Ten nanometer-sized tuning of LNPs was achieved for the optimum residence time at the critical concentration using the microfluidic devices with chaotic mixer structures. The residence times at the critical concentration necessary to control the LNP size were 10, 15–25, and 50 ms time-scales for 30, 40, and 50 nm-sized LNPs, respectively. Finally, we proposed the LNP formation mechanism based on the determined LNP formation behavior and the critical ethanol concentration. The precise size-controlled LNPs produced by the microfluidic devices are expected to become carriers for next generation nanomedicines and they will lead to new and effective approaches for cancer treatment.

Highlights

  • Lipid nanoparticles (LNPs) or liposomes are the most widely used drug carriers for nanomedicines [1,2,3]

  • We demonstrated the effect of lipid concentration and dilution rate on the LNP size using microfluidic devices

  • We found that mixing performance of the microfluidic devices was the essential factor for producing the small-sized LNPs at the low flow rate or the low flow rate ratio (FRR)

Read more

Summary

Introduction

Lipid nanoparticles (LNPs) or liposomes are the most widely used drug carriers for nanomedicines [1,2,3]. We proposed a LNP formation mechanism in the microfluidic device and a concept of critical concentration to control the LNP size. Understanding the formation mechanism of lipid nanoparticles in microfluidic devices with chaotic micromixers understood. Understanding the LNP formation mechanism and the critical concentration allows us to develop high performance LNPs production systems using microfluidics, leading to the generation LNPs-based nanomedicines. We investigated the effect of lipid concentration and the mixing performance of microfluidic devices on the LNP formation behavior. The master molds of the microfluidic devices with chaotic micromixers were fabricated by two-step photolithography [27]. The silicon wafers were spin-coated using a spin coater (MS-A100, Mikasa Shoji, Co., Ltd., Tokyo, Japan) to a thickness of 79 μm and the wafers were baked on a hot plate for 30 min to evaporate the solvent. The size of the LNPs was measured by dynamic light scattering (DLS) using a Zetasizer Nano ZS ZEN3600 instrument (Malvern Instruments, Worcestershire, UK)

Evaluation of the mixing performance
Results and discussion
À 1 Â 100
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call