Understanding the effects of pore pressure–induced crack deformation on the acoustic anisotropy of rocks with aligned cracks

Abstract

AbstractCracks are extensively existing in rocks and play a significant role in the acoustic anisotropy of cracked rocks. Rocks in nature are affected by pore pressure, whereas the crack deformation with pore pressure and the impacts of the crack deformation on the anisotropic acoustic properties remain little known. Combining the theoretical model with the laboratory measurements of the anisotropic velocities of artificial sandstone samples with and without aligned penny‐shaped cracks, we invert for the crack parameters that characterize the crack deformation as a function of pore pressure and theoretically simulate the impacts of pore pressure–induced variation in the crack parameters on the anisotropic velocities. The results show that with increasing pore pressure, the inverted crack porosity increases exponentially, whereas the inverted crack aspect ratio decreases exponentially and the two crack parameters are linearly correlated. Moreover, model calculation demonstrates that the anisotropic velocities exhibit distinct reductions with the variation in the crack parameters caused by increasing pore pressure. In particular, the reduction in the velocity of the shear wave travelling parallel to the crack plane with polarization perpendicular to the crack plane is the most pronounced. We also demonstrate that the effects of the pore pressure–induced increasing crack porosity on the anisotropic velocities are more pronounced than the impacts of the decreasing crack aspect ratio. The findings not only reveal the variation of the crack geometry with pore pressure and the effects of the crack deformation on the anisotropic velocities of the cracked rocks but also can provide theoretical support for improving the characterization of the cracks through seismic survey.