Abstract

The process analysis is performed for August and December, 2002 using the process analysis tool embedded in the Community Multiscale Air Quality (CMAQ) modeling system at a fine horizontal grid resolution of 4-km over an area in the southeastern U.S. that is centered at North Carolina. The objectives are to qunatify the contributions of major atmospheric processes to the formation of major air pollutants and provide the insights into photochemistry that governs the fate of these pollutants at a fine grid scale. The results show that emissions provide a dominant source for gases including ammonia (NH3), nitric oxide (NO), nitrogen dioxide (NO2), and sulfur dioxide (SO2) and Particulate Matter (PM) species including fine PM (PM2.5) and its composition such as sulfate, elemental carbon, primary organic aerosol, and other inorganic fine PM in both months. While transport acts as a major sink for NH3, NO, and SO2 at most sites and PM2.5 and most of PM2.5 composition at urban sites, it provides a major source for nitric acid (HNO3) and ozone (O3) at most sites in both months, and secondary PM species in August and most PM species in December at rural and remote sites. Gas-phase chemistry serves as a source for NO2 and HNO3 but a sink for O3 at urban and suburban sites and for NO and SO2 at all sites. PM processes contribute to the formation of PM2.5 and nitrate () at the urban and suburban sites and secondary organic aerosol (SOA) at most sites in December and ammonium () in both months. They reduce formation at most sites in August and at rural and remote sites in December and the formation of PM2.5 and SOA at most sites in August. Dry deposition is an important sink for all these species in both months. The total odd oxygen (Ox) production and the total hydroxyl radical (OH) reacted are much higher at urban and suburban sites than at rural sites. Significant amounts of OH are consumed by biogenic volatile organic compounds (BVOCs) in the rural and remote areas and a combination of anthropogenic VOCs (AVOCs) and BVOCs in urban and subareas areas in August and mainly by AVOCs in December. The amount of NO2 produced by the reactions of hydroperoxy radical (HO2) is similar to that of organic peroxy radical (RO2) at all sites in August but higher than that by the reactions of RO2 inDecember. The production rate of HNO3 due to the reaction of OH with NO2 dominates in both months. The ratio of the production rates of hydrogen peroxide (H2O2) and HNO3 (PH2O2/PHNO3) is a more robust photochemical indicator than the ratios of their mixing ratios (H2O2/HNO3) and the afternoon mixing ratios of NOy in both months, and it is highly sensitive to the horizontal grid resolution in August. The use of PH2O2/PHNO3 simulated at 4-km indicates a VOC-limited O3 chemistry in urban and suburban areas in August that was not captured in previous model simulations at a coarser grid resolution.

Highlights

  • Process Analysis (PA) is a useful tool embedded in a 3-D air quality model that calculates the Integrated Process Rates (IPR) for major atmospheric processes such as emissions, chemical reactions, horizontal and vertical transport, and removal processes and the Integrated Re-action Rates (IRR) for all gas-phase chemical reactions in all model grid cells

  • The process analysis is performed for August and December, 2002 using the process analysis tool embedded in the Community Multiscale Air Quality (CMAQ) modeling system at a fine horizontal grid resolution of 4-km over an area in the southeastern US that is centered at North Carolina

  • The results show that emissions provide a dominant source for gases including ammonia (NH3), nitric oxide (NO), nitrogen dioxide (NO2), and sulfur dioxide (SO2) and Particulate Matter (PM) species including fine PM (PM2.5) and its composition such as sulfate, elemental carbon, primary organic aerosol, and other inorganic fine PM in both months

Read more

Summary

Introduction

Process Analysis (PA) is a useful tool embedded in a 3-D air quality model that calculates the Integrated Process Rates (IPR) for major atmospheric processes such as emissions, chemical reactions, horizontal and vertical transport, and removal processes and the Integrated Re-. The results from IPR provide the relative contributions of individual physical and chemical processes to the formation of gas and Particulate Matters (PM) species. These processes include emissions, vertical and horizontal transport, gas-phase chemistry, PM processes, aqueous-phase processes (or cloud processes), and dry deposition. PA has been conducted in several studies to quantify the contributions of atmospheric processes and chemical reactions to the formation of O3 and PM2.5 [e.g., 3-9]. All those studies focused only criteria pollutants such as O3 and PM2.5 and used a horizontal grid resolution of 36-km or coarser. ), in addition to that of creteria air pollutants such as nitric oxide (NO), nitrogen dioxide (NO2), sulfur dioxide (SO2), O3, and PM2.5

Modeling Domain and Simulation Setup
Integrated Process Rates
Findings
Summary
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call