Abstract

The comprehensive kinetic study for CuCl2/γ-Al2O3-based catalysts was performed to elucidate the co-promoter effect in the ethylene oxychlorination, one of the most significant industrial processes to produce vinyl chloride monomer. Kinetic analysis was performed separately by transient kinetic studies, taking account of the reduction and oxidation steps in the catalytic cycle. The promoter effects on ethylene oxychlorination were ascribed to their influence on the Cu2+ reduction or Cu+ oxidation in the catalytic cycle. The reaction rate-diagram was gained and used to predict the steady-state reaction rate and Cu oxidation state by an operando setup combing MS and UV–vis-NIR spectroscopy. The results indicated that the K-doped catalyst could greatly increase the reaction rate of the oxidation step, which gave rise to higher Cu2+ concentration on the catalyst. Mg-doped catalyst had a great effect on enhancing the reaction rate for the reduction step. K and Mg co-doped catalyst had the dual effect, both the reaction rate and Cu oxidation state were located between K and Mg mono-doped catalyst. The results of steady-state reactions indicated that the reaction rates were quite close with that predicated by the rate-diagram. Byproduct analysis during the steady-state was also performed, the results demonstrated that the co-promoted catalysts can also reduce the byproduct formation. The current study is expected to provide one way for exploring the potential benefits of co-promotion on CuCl2/γ-Al2O3-based industrial oxychlorination catalysts to improve the catalytic performance and understand the reaction further.

Highlights

  • Polyvinyl chloride (PVC) is one of the most commonly used plastics in the world

  • The results show that the texture properties are not significantly changed by doping of promoters

  • For the K doped catalyst, it enhanced the oxidation reaction rate a lot, while prohibiting the reduction step, and more Cu2+ was retained on the catalyst, which gives rise to high stability. While it is reverse for the Mg-doped catalyst, it increased the reduction rate more than the oxidation, which gives rise to less Cu2+ concentration and less stability compared to the K-doped catalyst

Read more

Summary

Introduction

Polyvinyl chloride (PVC) is one of the most commonly used plastics in the world It is produced through the polymerization of its monomer vinyl chloride (commonly called VCM in abbreviation) [1,2,3]. Many efforts have been devoted to the study of the ethylene oxychlorination process [10,11,12,13,14,15] It is commonly called as a balanced VCM process in the industry. The oxychlorination process follows the overall reaction as Eq 1 [11,16,18,20,21,22,23]

Methods
Results
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call