Abstract
A comparative study of the laser-induced damage thresholds (LIDTs) of fused silica substrates and their sol-gel silica coatings was carried out with 355 nm laser irradiation. Chemical etching and superpolishing were employed in different ways to improve the substrate. The laser damage tests showed that the coated substrate was no more susceptible to laser damage than the bare substrate, showing that the substrate quality was the dominant factor limiting the LIDT for UV irradiation. In addition, it was found that high value of substrate microroughness was more harmful to the LIDT of the coated than the bare substrate, and that a proper combination of etching and superpolishing can optimize the LIDT.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
