Abstract
A novel specially designed ultrasonic monitoring apparatus (UMA) for in-situ continuous studying of the early age hydration process of cementitious materials was developed. Utilizing UMA, the early microstructure formation process was systematically investigated for ultra-high performance cementitious materials made with various mineral admixtures (fly ash, slag and silica fume), fine and coarse aggregates, different volume fraction of steel fiber (0, 1%, 2% and 3%). The influence of curing temperature (20, 40, 60, 80 and 90°C) was also studied. The results show that four stages can be clearly identified during the microstructure formation process of ultra-high performance cementitious materials with sand, aggregate or steel fiber: pre-dormant stage, dormant stage, acceleration stage, and deceleration stage, while only the last three stages occur for the one without fillers and reinforcement. Curing temperature, mineral admixtures, fillers and reinforcement addition have great impact on microstructure formation process. Hydration reaction rate is obviously promoted with an increase in curing temperature. Silica fume addition also accelerates the microstructure formation, while the reverse phenomenon is observed when fly ash and slag are incorporated. Steel fiber addition retards the microstructure formation, especially in high volume fraction of fiber.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.