Abstract
The Fe3O4-loaded coffee waste hydrochar (Fe3O4-CHC) was synthesized using a simple precipitation method. The as-prepared adsorbent was characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and Fourier transform infrared spectroscopy (FT-IR). The EDX analysis indicated the presence of Fe in the structure of Fe3O4-CHC. The specific surface area of hydrochar increased from 17.2 to 34.7m2/g after loading of Fe3O4 nanoparticles onto it. The prepared Fe3O4-CHC was used for removal of Acid Red 17 (AR17) through ultrasound-assisted process. The decolorization efficiency decreased from 100 to 74% with the increase in initial dye concentration and from 100 to 91 and 85% in the presence of NaCl and Na2SO4, respectively. The synthesized Fe3O4-CHC exhibited good stability in the repeated adsorption-desorption cycles. The high correlation coefficient (R2=0.997) obtained from Langmuir model indicated that physical and monolayer adsorption of dye molecules occurred on the Fe3O4-CHC surface. Furthermore, the by-products generated through the degradation of AR17 was identified by gas chromatography–mass spectrometry analysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
