Ultrasound-assisted material characterization: An innovative method for the non-destructive in-situ detection of microstructural changes of high-strength aluminum alloys

Abstract

The use of aluminum alloys in conjunction with thermal-assisted forming techniques permits the production of high-strength and geometrically complicated components without failure. By using innovative, temperature-dependent production techniques, it is possible to manufacture components with tailored properties. So far, however, it is not possible to characterize the microstructural behavior under thermal and mechanical load in real-time. Using a novel characterization method, which is based on the principle of laser ultrasonic testing, it has become possible to record contact-free and non-destructive microstructural changes in-situ during thermo-mechanical treatment. This allows the interaction-free detection of thermal as well as mechanical effects during thermal-supported forming operations. In this research work, the temperature-dependent behavior during the quenching and aging process of the precipitation-hardenable aluminum alloy AA6082 for a tailor-quenched forming process is recorded in real-time using laser ultrasonic techniques. First, the effects of different tool temperatures on quenching rates and material properties were investigated using conventional characterization methods, including temperature measurement, hardness and tensile tests. It was shown that a die temperature of 325 °C leads to the lowest material hardness and strength. Subsequently, the results were compared with the novel, non-destructive in-situ testing method and validated using microstructural analysis. It was proven, that microstructural changes can be identified during varying quench and aging operations. Thus, the influence of different process parameters on the microstructural and mechanical development of aluminum components can be detected in-situ for the first time.