Abstract

Herein, we have developed a novel hybrid material based on NiCo 2 S 4 (NCS), halloysite nanotubes (HNTs), and carbon as promising electrodes for supercapacitors (SCs). Firstly, mesoporous NCS nanoflakes were prepared by co-precipitation method followed by physically mixing with HNTs and carbon, and screen printed on nickel foam. After ultrasonication, a uniform distribution of the Carbon/HNTs complex was observed, which was confirmed by surface morphological analysis. When used as electrode material, the NCS/HNTs/C hybrid displayed a maximum specific capacity of 544 mAh g −1 at a scan rate of 5 mV s −1 . Later, a solid-state hybrid SCs was fabricated using activated carbon (AC) as the negative and NCS/HNTs/C as the positive electrode (NCS/HNTs/C//AC). The device delivers a high energy density of 42.66 Wh kg −1 at a power density of 8.36 kW kg −1 . In addition, the device demonstrates long-term cycling stability. Furthermore, the optimized NCS, NCS/HNTs, and NCS/HNTs/C nanocomposites also presented superior hydrogen evolution reaction (HER) performance of 201, 169, and 116 mV in the acidic bath at a current density of 10 mA cm −2 , respectively. Thus, the synthesis of NCS/HNTs/C nanocomposite as positive electrodes for hybrid SCs opens new opportunities for the development of next-generation high energy density SCs. • Synthesis of novel hierarchical NiCo 2 S 4 nanoflakes using a simple co-precipitation method with high electrochemical performance. • Preparation of final NiCo 2 S 4 /HNTs/C composite electrode by screen-printing method on Ni foam. • Improved the supercapacitor capacitive properties than the NiCo 2 S 4 /HNTs/C then the NiCo 2 S 4 and NiCo 2 S 4 /HNTs composite. • A novel NiCo 2 S 4 /HNTs/C//AC constructed solid-state hybrid device. • SSHSc shows a high energy density of 42.66 Wh kg −1 at a power density of 8.36 kW kg −1 .

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.