Abstract

BackgroundAn incredible increase in the integration of electronic chips has pushed the semicon industries to endorse high numerical aperture (h-NA ∼ 0.5), extreme-ultraviolet (EUV) lithography (EUVL) (λ ∼ 13.5 nm) at the commercial scale. Induction of h-NA postulates EUV resists that could outperform the resolution, line pattern roughness, and sensitivity (RLS) trade-off for chip fabricators, which is currently extremely limited.AimThe development of EUV resist to balance RLS trade-off as well as overcome throughput limitations of h-NA EUV system to facilitate high volume semiconductor manufacturing.ApproachHere, we developed indium-methacrylic acid-based metal-organic clusters resist for h-NA, EUVL. To examine the h-NA single exposure patterning potential of the resist, prescreening by sub-10 nm next-generation lithography (NGL) tools such as electron beam lithography (EBL), and helium ion beam lithography (HIBL) were conducted as a prelude to EUV exposure.ResultsDense ∼13 nm, (l/s) patterns at ∼45 and ∼30 μC / cm2 were well resolved by EBL and HIBL, on the top this the line edge roughness (LER) was 2.48 ± 0.04 nm, and etch resistance ∼1.98 and ∼0.34 times lower than Si and SiO2 / Si systems. Also, In-MAA MOCs resist shows ultra-sensitivity of 2.3 mJ / cm2 towards h-NA EUVL for patterning up to 26 nm half-pitch line patterns with LER ∼2.36 ± 0.16 nm.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.