Abstract
We present the synthesis, analysis, and utility of polyvinylpyrrolidone (PVP) stabilized monometallic silver nanospheres for liquefied petroleum gas sensing at room temperature. We have synthesised silver nanospheres (Ag-NSs) in the diameter range of 13–21 nm using a microwave assisted method, which is both easy and fast, because microwave irradiation only takes 30 s. A solution of 0.1 M silver nitrate (AgNO3) in an ethanolic medium was microwave-irradiated to produce Ag-NSs. PVP was used as a stabilising agent throughout the process. Spin coating method was used to produce thin films of synthesised monometallic Ag-NSs. X-ray diffraction (XRD), scanning electron microscopy (SEM), acoustic particle sizer (APS), UV–visible absorption (UV–visible) and Fourier Transform Infrared (FT-IR) spectroscopy were used for characterising Ag-NSs. Based on the acoustic attenuation of the prepared sample, the acoustic particle sizer estimated the diameter of Ag-NSs to be around 17 nm. The deposited films were examined for LPG leakage detection at ambient temperature. This is the first report on monometallic Ag-NSs for leakage detection of LPG at room temperature operation below its lower explosive limit (LEL). The significant finding of the developed sensor is that it prompts the quick response (∼16 s) and recovery (∼64 s) as Ag enhances the reaction rate between the sensing film surface and adsorbed LPG, thereby, augments the sensitivity of sensor even below LEL. Moreover, the fabricated LPG sensor shows noteworthy reproducibility (measured up to six cycles) and stability up to 06 months after fabrication.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.