Abstract

Assessing changes in heavy metals concentrations in Antarctic snow dated from the last century is of high interest to determine to which extent the most remote regions of our planet are contaminated for these metals, and to have a better understanding into their long-range transport from the different natural and anthropogenic source areas to the Antarctic continent. Such investigations are unfortunately very difficult because the concentrations to be measured are exceedingly low, down to the sub-picogram per gram level. They require a strict control of contamination problems from field sampling to laboratory analysis, and the use of ultrasensitive analytical techniques. We present here important advances in the analytical protocols for obtaining reliable data on the occurrence of heavy metals in Antarctic snow. Utmost precautions were taken to obtain a series of large size ultraclean snow blocks from the wall of a 8.3 m clean hand-dug pit at a remote site in Coats Land, Antarctica. These blocks were then sub-sampled inside a laminar flow clean bench in a cold room, using ultraclean protocols, to provide high-resolution heavy metal times series. V, Cr, Mn, Cu, Ag, Ba, Pb, Bi and U were then determined directly, without any pre-concentration step, by the ultrasensitive inductively coupled plasma sector field mass spectrometry (ICP-SFMS) technique in clean room conditions. Calibration of the instrument was performed using ultralow concentrations standards, and extreme precautions were taken to ensure the cleanliness of the instrument and its introduction system. The results show that it is possible to accurately measure a variety of heavy metals in Antarctic snow, down to the sub-picogram per gram level, using this approach. Examples of the data obtained for the Coats Land site are finally presented. For U, the observed concentrations range from 0.004 to 0.21 pg/g; they are the first data ever obtained for this metal for Antarctic snow and ice.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.