Abstract
The applications of AMLA (aspheric micro lens array) have been frequently required in opto-electro industries, such as optical communication, contact image sensor (CIS) module of scanner, wafer level optics, etc. In addition to the typical requirements of aspheric lens, for instance form accuracy and surface roughness, the pitch error of each micro lens has been highly required. Three ultra-precision freeform machining methods have been widely applied for the manufacturing of AMLA, namely fast tool servo, slow tool servo and diamond milling. UPDM (Ultra-precision diamond milling) have the advantage with no tool interference problem in comparison with tool servo machining techniques. In this paper, the tool setting error compensation method and the tool path of UPDM has been developed for the fabrication of a 5 by 5 AMLA model. The form accuracy and surface roughness of each lenses of the AMLA was less than 0.2μm and 5nm, respectively. And the pitch error of each micro lens was less than 2μm in 25 micro lenses.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
