Ultra-Portable Smartphone Controlled Integrated Digital Microfluidic System in a 3D-Printed Modular Assembly

Mohamed Yafia,Homayoun Najjaran,Mina Hoorfar,Ali Ahmadi

doi:10.3390/mi6091289

Mohamed Yafia, Homayoun Najjaran + Show 2 more

Open Access

https://doi.org/10.3390/mi6091289

Copy DOI

Journal: Micromachines	Publication Date: Sep 7, 2015
Citations: 28	License type: CC BY 4.0

Affiliation: University of British Columbia

Abstract

Portable sensors and biomedical devices are influenced by the recent advances in microfluidics technologies, compact fabrication techniques, improved detection limits and enhanced analysis capabilities. This paper reports the development of an integrated ultraportable, low-cost, and modular digital microfluidic (DMF) system and its successful integration with a smartphone used as a high-level controller and post processing station. Low power and cost effective electronic circuits are designed to generate the high voltages required for DMF operations in both open and closed configurations (from 100 to 800 V). The smartphone in turn commands a microcontroller that manipulate the voltage signals required for droplet actuation in the DMF chip and communicates wirelessly with the microcontroller via Bluetooth module. Moreover, the smartphone acts as a detection and image analysis station with an attached microscopic lens. The holder assembly is fabricated using three-dimensional (3D) printing technology to facilitate rapid prototyping. The holder features a modular design that enables convenient attachment/detachment of a variety of DMF chips to/from an electrical busbar. The electrical circuits, controller and communication system are designed to minimize the power consumption in order to run the device on small lithium ion batteries. Successful controlled DMF operations and a basic colorimetric assay using the smartphone are demonstrated.

Highlights

There has been a trend toward developing compact and portable devices with user friendly interface for numerous biomedical and chemical applications [1,2,3,4]
The reconfigurable architecture of digital microfluidic (DMF) systems permits the real-time change of fluidic protocols on the same chip, which cannot be achieved in conventional continuous flow systems [7,8,9,10,11,12]
Compact and low cost circuits were designed to generate the high voltages required for performing DMF operations

Summary

Introduction

There has been a trend toward developing compact and portable devices with user friendly interface for numerous biomedical and chemical applications [1,2,3,4]. Microfluidics is one of the promising platforms for developing portable devices that allow real-time screening and on-chip diagnosis [5,6]. The reconfigurable architecture of digital microfluidic (DMF) systems permits the real-time change of fluidic protocols on the same chip, which cannot be achieved in conventional continuous flow systems [7,8,9,10,11,12]. Several attempts have been made to introduce continuous microfluidic operations inside portable devices [13,14], few studies have focused on developing portable DMF platforms [15,16,17]. Another research group has introduced a more advanced packaging for the DMF system in a portable box that can be controlled by a handheld tablet [17,18]

Methods

Results

Conclusion