Abstract
Ultralow-frequency band gaps are realized to suppress the ultralow-frequency flexural wave propagation in the beams with periodically attached quasi-zero-stiffness (QZS) resonators, which are designed by inserting quasi-zero-stiffness systems into the mass-in-mass structures. The band structure and the transfer matrix of the QZS locally resonant beam are derived by the transfer matrix method to quantify the wave attenuation performance of band gaps. Then, the effect of the stiffness ratio on the bandgap characteristic is studied. It is shown that, thanks to the introduction of the QZS system, the band gaps can be easily transferred to lower frequency or even ultralow frequency without weakening the static stiffness of the resonators. Finally, the flexural wave propagation in locally resonant beam consisting of multiple periodic arrays of QZS resonators is investigated. The result shows that differential design of the bandgap frequencies can be easily realized by adjusting the negative stiffness coefficient of the QZS resonators, so as to obtain broadband flexural wave suppression performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.