Abstract

For on-chip interconnects, an ideal light source should have an ultralow energy consumption per bandwidth (operating en-ergy) as well as sufficient output power for error-free detection. Nanocavity lasers have been considered the most ideal for smaller operating energy. However, they have a challenge in obtaining a sufficient output power. Here, as an alternative, we propose an ultrahigh-speed microcavity laser structure, based on a vertical cavity with a high-contrast grating (HCG) mirror for transverse magnetic (TM) polarisation. By using the TM HCG, a very small mode volume and an un-pumped compact optical feedback structure can be realised, which together tailor the frequency response function for achieving a very high speed at low injection currents. Furthermore, light can be emitted laterally into a Si waveguide. From an 1.54-μm optically-pumped laser, a 3-dB frequency of 27 GHz was obtained at a pumping level corresponding to sub-mA. Using measured 3-dB frequen-cies and calculated equivalent currents, the modulation current efficiency factor (MCEF) is estimated to be 42.1 GHz/mA1/2, which is superior among microcavity lasers. This shows a high potential for a very high speed at low injection currents or avery small heat generation at high bitrates, which are highly desirable for both on-chip and off-chip applications.

Highlights

  • In this Letter, we propose a novel way of tailoring the frequency response, based on the Si-integrated VCL (Si-VCL) structure with a TM HCG reflector

  • It may enable to achieve a low operating energy, which is desirable for on-chip lasers

  • It may greatly reduce the heat generation, which is dominated by Joule heating around the active region

Read more

Summary

Introduction

In this Letter, we propose a novel way of tailoring the frequency response, based on the Si-integrated VCL (Si-VCL) structure with a TM HCG reflector. The flattening of response spectrum allows for enhancing the modulation speed (B) at a given 3-dB frequency by diminishing the pulse-to-pulse interactions, called pattern effects. This tailoring enables to achieve a very high speed at low injection levels, resulting in a very high MCEF. An integrated lateral optical feedback structure enables to suppress the relaxation resonance as well as further increasing the 3-dB frequency. The laser sample was characterised by using the optically pumping method. The application potentials of the proposed laser structure and possible issues for electrically pumped versions are discussed

Methods
Results
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.