Ultrafiltration pre-oxidation by boron-doped diamond anode for algae-laden water treatment: membrane fouling mitigation, interface characteristics and cake layer organic release

Abstract

In this study, ultrafiltration (UF) pre-oxidation with a boron-doped diamond (BDD) electrode was employed aiming to mitigate membrane fouling during algae-laden water treatment. It was found that BDD anodizing can efficiently alleviate membrane fouling regardless of the filtration membrane material when the oxidation time was over 30 min. This was because that the cake layer fouling resistance was highly mitigated by the pre-oxidation process. The generated small molecular organics after anodic oxidation might increase the potential of pore blockage. The anodizing preferentially oxidized hydrophobic organic and fluorescent substances, which is conducive to reducing membrane fouling and improving production efficiency. Besides, disinfection byproduct precursors and harmful algae derived substances of UF filtrated solution were contained. The algae bodies tend to agglomeration and the zeta potential obviously declined after the pretreatment, which is instrumental in forming a loose cake layer structure. In addition, the interaction force between membrane and foulants also converted to a repulsion force after pre-oxidation, which implies that BDD pre-oxidation was an effective way to mitigate cake layer fouling by reducing foulant-membrane interactions. At last, the secondary organic release of a dynamic formed cake layer was proved to be limited especially for living algae cells.