Abstract
This paper presents a strategy to design ultrawideband power amplifiers with a fractional bandwidth of approximately 200%. It exploits a simple output matching network, which consists of a series transmission line together with a shunt stub, to compensate the output parasitic network of the device. Following this, a multisection transformer is implemented to obtain the optimal load at the intrinsic drain plane. As design examples, several output matching networks were designed for two different size GaN HEMT devices. One of these examples was implemented and characterized, and a drain efficiency from 52% to 70% and an output power between 40 dBm and 42.5 dBm were obtained, over 67% of the 5G sub-6-GHz band (i.e., 0.1 to 4 GHz). The aforementioned results, to the best of the authors’ knowledge, represent the state of the art in broadband power amplifiers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
