Abstract

A low-power, inductorless, UWB CMOS voltage controlled oscillator is designed in 0.18 μm CMOS technology targeting to a UWBFM transmitter application. The VCO is a Double-Cross-Coupled Multivibrator and generates output frequencies ranging from 1.55 GHz to 2.4 GHz. A low-power frequency doubler based on a Gilbert cell, which operates in weak inversion, doubles the VCO tuning range from 3.1 GHz to 4.8 GHz. The proportionality between the oscillation frequency and the bias current is avoided in this case for the entire achieved tuning range resulting in a low-power design. The selected architecture provides high suppression, over 45 dB, for the 1st and 3rd harmonics, while enabling high-frequency operation and conversion gain due to the unbalanced structure and the single-ended output. The proposed VCO draws 4 mA from a 1.8 V supply, it has a phase noise of −76.7 dBc/Hz at 1 MHz offset from the center frequency, while it exhibits a very high ratio of tuning range (43%) over power consumption equal to 7.76 dB.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.