Abstract

What we believe to be a novel high-sensitivity fiber-optic pressure sensor based on the vernier effect and helical structure is proposed and experimentally verified. The sensor utilizes the superposition of higher-order mode Mach-Zehnder interference and Sagnac fundamental mode polarization interference in a single fiber ring to achieve the vernier effect. In addition, a non-invasive encapsulation structure was fabricated to convert the rise and fall of the pressure value into the change in the twist angle of the optical fiber. This approach reduces the interference of the detecting medium on the sensor signal while simultaneously increasing the sensitivity of the pressure sensor. According to experimental data, the detection sensitivity of the sensor can reach −67277 nm/MPa, which is 65 times higher than the sensitivity of the conventional vernier effect pressure sensor. It also solves the issue of temperature interference with the Vernier-effect structured fiber optic sensor. The sensor has a measured temperature cross-sensitivity of 0.000065 kPa/°C, which is significantly lower than that of comparable sensors. This makes the sensor highly sensitive and ideal for low crosstalk pressure measurement.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.