Abstract

Abstract An electro-optical polymer optical fiber modulator based on D-shaped few-mode fiber is proposed and optimized. In the D-shaped few-mode fiber, the electro-optic polymer coated on the few-mode fiber influences the refractive index of LP01 mode and LP02 mode, while LP01 mode is more sensitive. According to that, the mode field distribution has been analyzed and the varying properties of D-shaped FMF covered with electro-optic polymer has been discussed. Its simple cascade and axial alignment design enhances the stability of all-fiber modulators. Using improved M-Z structure with advanced operating point, the electro-optic modulator achieves an insertion loss of less than 2 dB with a modulation depth of 22 dB at 1550 nm. And the length of modulator is 25.69 mm. Moreover, the Vpi is 2.7 V and the optical bandwidth is 6.9 nm, which make the modulator have low power consumption and can be used in next-generation all-optical communication networks.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.