Ultra-lightweight carbon fibre/thermoplastic composite material using spread tow technology

Abstract

This paper reports a study of a method for achieving ultra-lightweight thermoplastic composites referred to as tow-spreading technology, whereby a conventional 12k carbon fibre (CF) tow is thinned by increasing the tow width from 5mm to approximately 25mm, thereby reducing the weight per unit area by approximately 500%. Using the tow-spreading technology, sheets of unidirectional and/or woven fabric may be produced. Thermoplastic film of polyphenylene sulphide (PPS) was used to stabilise and impregnate the spread tow fabric, converting it into a partially consolidated prepreg; woven 12k CF spread tow/PPS (55/45wt%). A consolidated laminate was then made from the prepreg, and for comparison, a second laminate was produced from a conventional woven prepreg of 3k CF/PPS (60/40wt%). The spread tow laminate exhibited better fibre packing, lower level of crimp, lower void content and improved mechanical properties.