Abstract
An austenitic Hadfield steel sheet shows a relatively low yield strength of 0.4–0.5 GPa and serrated flows in spite of excellent tensile strength and ductility along with highly-sustained strain hardening. In order to overcome the shortcomings, a multi-layer steel (MLS) sheet was fabricated by a roll-bonding with an ultra-high-strength martensitic hot-press-forming (HPF) steel sheet. Near the Hadfield/HPF interface, the carburized and decarburized layers were formed by the carbon diffusion from the Hadfield (1.2% of C) to HPF (0.23% of C) layers, and could generate a kind of very thin multi-layers of 35 μm in thickness. All tensile properties of the Hadfield/HPF MLS sheet (yield strength; 946 MPa, tensile strength; 1291 MPa, elongation; 44.5%) were superior to those of the Hadfield sheet. Interestingly, the persistent elongation up to 44.5%, which is higher than that of the Hadfield steel, in the present MLS sheet is a quite unique and interesting characteristic. The simultaneous enhancement of strength and ductility of the MLS sheet was explained by the contributions of 1) populated twin formation, 2) generation of geometrically necessary dislocations (GNDs), and 3) increase of back stress inside thin interfacial layers.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
