Ultra Flow, High Stiffness Polypropylene Material for Light Weight Exterior Trim Panels

Abstract

<div class="section abstract"><div class="htmlview paragraph">Light weighting is an effective strategy in increasing energy efficiency in the automotive industry. In this paper, mass reduction with cost benefit was targeted in an exterior trim panel. Polypropylene copolymer (PPCP) compound was developed for a large exterior trim panel (1400 X 700mm) having an integrated grill mesh. The part had challenging requirements in terms of slow speed impact, structural durability, dimensional stability, aesthetics, thermal ageing resistance, cold impact resistance, scratch resistance and weathering resistance. By having ultra-high flow behavior, optimum tensile strength, modulus, impact strength and thermal properties, the PPCP compound met the requirements for a thin wall exterior trim panel with a thickness of 2.6mm.</div><div class="htmlview paragraph">Structural durability of the design was validated by virtual engineering. Part design and material combinations with better tooling design iterations were analyzed by using mold flow analysis. Complete product performances were being validated for predefined key test metrics such as structural durability, thermal aging, cold impact, scratch resistance and weathering criteria. This part met the required specification. The combination of material, optimized part and tool design led to weight savings, good surface quality, dimensional stability under sun load, grill integration and considerable cost reduction.</div></div>