Abstract
The effect of ZnO particle size on the adsorptive desulfurization performance for Ni/ZnO (5wt% NiO) adsorbent was investigated using thiophene as a sulfur containing compound in model gasoline with a fixed bed reactor. The Ni/ZnO adsorbents with different ZnO particle sizes (8, 12, 20, 30nm) were prepared by an impregnation method and characterized by powder X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM) and transmission electron microscopy (TEM). It was found that the adsorption capacity of the Ni/ZnO adsorbent for thiophene significantly increased with the decrease of the ZnO particle sizes. Typically at a breakthrough sulfur level of 1mg/L, sulfur capacity of Ni/ZnO (8nm) from model gasoline (500mg/L) is much higher than that of Ni/ZnO (30nm) from 84mg sulfur per gram adsorbent to nearly 0mg sulfur per gram adsorbent. This higher desulfurization activity and sulfur capacity for Ni/ZnO with smaller ZnO particle sizes could be derived from higher Ni dispersion on ZnO and lower mass transfer limitations of sulfur to ZnO from Ni in H2.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.