Ultimate bearing capacity of T-shaped retrofitting diagonal members for angle steel transmission towers

Abstract

Collapse of steel latticed transmission towers under strong winds is a significant safety concern for power systems. Attaching additional members to the tower members can enhance the wind resistance of transmission towers. To establish systematic retrofitting schemes and methods for predicting the ultimate bearing capacity of T-shaped retrofitting diagonal members, static experiments and finite element analysis on various cross-sectional dimensions and member lengths were utilized in this study. The experimental results indicate that retrofitting can effectively increase the bearing capacity of diagonal members. Finite element models are developed and verified based on the discussion of load-displacement curves and failure modes. The finite element analysis reveals that the increase in capacity achieved by reducing connector spacing is relatively small when compared to the ultimate bearing capacity obtained with the spacing of two connectors, and the arrangement of connectors at both ends meets the requirement of connector spacing. The relationship between the retrofitting bearing capacity and the slenderness ratio of diagonal members can be divided into two linear stages, which correspond to different failure modes. Furthermore, a λk coefficient method based on the axial compression equation is proposed to predict the ultimate bearing capacity of T-shaped retrofitting members. The bearing capacity based on the λk method shows agreement with finite element analysis results.