Abstract
We investigated the competitive growth of dendrites at the converging grain boundaries (GBs) of bicrystals during the directional solidification of an Al–Cu alloy by means of two-dimensional phase-field simulations. In particular, the focus was on the recently observed phenomenon of unusual overgrowth during the directional solidification of a Ni-based superalloy, where the favorably oriented (FO) dendrites are overgrown by the unfavorably oriented (UO) ones. The phase-field simulations were accelerated by parallel computations on graphics processing units. The simulation results showed that unusual overgrowth occurs in Al–Cu alloys, indicating that this phenomenon is a common one in metallic materials. It was also concluded that the differences in the diffusion layers in front of the FO and UO dendrites had a dominant effect on the competitive growth of dendrites at the converging GB as well as on the unusual overgrowth. In addition, unusual overgrowth was observed in all the FO dendrites with a spacing that allowed the dendrite array to grow stably without necessitating a change in the number of dendrites. The FO dendrite at the GB is overgrown by the UO dendrite when the spacing between the FO dendrite at the GB and the next FO dendrite is approximately equal to the critical minimum spacing. However, the unusual overgrowth was not observed for UO dendrites with a large inclination angle. In this case, all the UO dendrites are blocked by the FO dendrite at the GB, and the FO dendrites migrate toward the UO dendrites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.