Abstract
The study focused on synthesizing the biochar from sawdust using torrefaction followed by pyrolysis. Sawdust was torrefied at different temperatures (125 °C, 150 °C, and 175 °C) using a conventional hot air oven. The obtained torrefied biochar was subjected to Microwave-assisted pyrolysis at a power of 300 W for 10 min. Graphite was used as a susceptor, and KOH was used as a catalyst. The maximum biochar product yield varied from 24 to 48 wt% and increased with torrefaction temperature. The average heating rates ranged from 54.5 to 74.6 °C/min. At 10 g of KOH, higher heating rates were obtained. The pyrolysis index analyzed varied between 97.5 and 111.5 and decreased with the increase in torrefaction temperature. The obtained biochar was analyzed using SEM, BET, XRD, FTIR, ICP-OES, and Raman spectroscopy. Porous structure formation enhanced, and the concentrations of Ca, Al, and Fe decreased with the increase in torrefaction temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
