Two-step process for the fabrication of direct FLG\\MoS2 heterostructures

Abstract

MoS2 has proven its efficacy in flexible electronics, transistor devices, and various biological and chemical applications. However, it is still challenging to achieve large-area MoS2 monolayers with desired material quality and electrical properties to fulfill the requirement for practical applications. Moreover, the main strategy for the preparation of a 2D heterostructure it is based on the sequential stacking of the layered materials using wet or dry transfer methods which introduces many defects. This paper presents an economically viable and straightforward two-step methodology to obtain MoS2 thin films, encompassing magnetron sputtering deposition of Mo and subsequent annealing in a sulfur-rich environment. This approach successfully yielded MoS2 thin films on Si\\SiO2 substrates. Additionally, heterostructures consisting of few layer graphene (FLG) and MoS2 were directly obtained using the same method. The utilization of grazing incidence X-ray diffraction verified the formation of the hexagonal MoS2 phase, a finding further confirmed by Raman spectroscopy. X-ray photoelectron spectroscopy (XPS) investigations revealed the successful sulfurization process, with surface-bound oxides forming only subsequent to air exposure. Comprehensive assessment involving X-ray reflectivity, atomic force microscopy and XPS collectively inferred the fabrication of thin films comprised of a small number of MoS2 layers covering the entire substrate. Electrical assessments exhibited an electrical hysteresis, demonstrating its potential for memristor applications. Overall, this study outlines a cost-effective fabrication method for producing nanoscale MoS2 thin films with excellent properties, avoiding the use of toxic gases such as H2S. These findings contribute to the potential development of cutting-edge applications.