Abstract
Two-step hot-pressing sintering (TSS) was applied to consolidate nanocomposite tungsten carbide–magnesia (WC–MgO) powders. The first step sintering was employed at a higher temperature to obtain an initial high density, and the second step was held at a lower temperature by isothermal sintering for several hours to increase bulk density without significant grain growth. The experimental results showed the sintering temperature plays an important role in densification and grain growth of WC–MgO compacts. The optimum TSS regime consisted of heating at 1750 °C (1st step) and 1550 °C (2nd step), resulting in the formation of near full dense microstructure (0.99 TD) with suppressed grain growth (2.59 μm). Accordingly, the improvement on the mechanical properties, including increase in the hardness (from 16.7 to 18.4 GPa), fracture toughness (from 10.2 to 12.95 MPa m 1/2) and flexural strength (from 976.6 to 1283.7 MPa), was also observed due to the grain refining and full dense bulk.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
