Two-Step Annealing CZTSSe/CdS Heterojunction to Improve Interface Properties of Kesterite Solar Cells.

Abstract

The post-heating treatment of the CZTSSe/CdS heterojunction can enhance the interfacial properties of kesterite Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. In this regard, a two-step annealing method was developed to enhance the heterojunction quality for the first time. That is, a low-temperature (90 °C) process was introduced before the high-temperature treatment, and 12.3% efficiency of CZTSSe solar cells was achieved. Further investigation revealed that the CZTSSe/CdS heterojunction band alignment with a smaller spike barrier can be realized by the two-step annealing treatment, which assisted in carrier transportation and reduced the charge recombination loss, thus enhancing the open-circuit voltage (VOC) and fill factor (FF) of the devices. In addition, the two-step annealing could effectively avoid the disadvantages of direct high-temperature treatment (such as more pinholes on CdS films and excess element diffusion), improve the CdS crystallization, and decrease the defect densities within the device, especially interfacial defects. This work provides an effective method to improve the CZTSSe/CdS heterojunction properties for efficient kesterite solar cells.