Abstract
The article substantiates the use of preliminary static loading and subsequent forging force when stamping thin sheet parts of complex shape with an elastic punch. The static load provides a relative deformation of the order of 20– 30% in the processing zone, which guarantees the stability of the position of the workpiece during subsequent pulsed loading. This technique is very important in the manufacture of asymmetric parts with a thickness of 0.01 – 0.3 mm. As a result, the accuracy of the products obtained corresponds to the 7th grade.The article provides a schematic diagram and a description of the proposed design of a double-action press, and analyzes the cyclogram of the device.It is recommended to carry out a static load with an electric drive, a pulsed one with a magnetic hammer, which is connected to a generator of impulse currents with a capacitive storage with an energy capacity of up to 40 kJ with a natural discharge frequency of the current of 20 kHz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have