Abstract
Previous studies have indicated that cumulative L5/S1 joint load is a potential risk factor for low back pain. The assessment of cumulative L5/S1 joint load during a field study is challenging due to the difficulty of continuously monitoring the dynamic joint load. This study proposes two regression models predicting cumulative dynamic L5/S1 joint moment based on the static L5/S1 joint moment of a lifting task at lift-off and set-down and the lift duration. Twelve men performed lifting tasks at varying lifting ranges and asymmetric angles in a laboratory environment. The cumulative L5/S1 joint moment was calculated from continuous dynamic L5/S1 moments as the reference for comparison. The static L5/S1 joint moments at lift-off and set-down were measured for the two regression models. The prediction error of the cumulative L5/S1 joint moment was 21±14 Nm × s (12% of the measured cumulative L5/S1 joint moment) and 14±9 Nm × s (8%) for the first and the second models, respectively. Practitioner Summary: The proposed regression models may provide a practical approach for predicting the cumulative dynamic L5/S1 joint loading of a lifting task for field studies since it requires only the lifting duration and the static moments at the lift-off and/or set-down instants of the lift.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
