Two-dimensional strain rate imaging study using a polarization camera and birefringent aqueous cellulose nanocrystal suspensions

Abstract

The birefringence response of aqueous cellulose nanocrystal (CNC) suspensions in a two-dimensional laminar flow is measured and studied. The suspensions have CNC concentrations of 1.0 wt% (weight percentage) and 1.2 wt%. Cellulose nanocrystals are optically anisotropic rod-like particles that align when subjected to local velocity gradients, whereas at rest, they remain randomly orientated by Brownian motion. The alignment causes birefringence, a phenomenon also known as flow-induced birefringence. We study the flow through an additively manufactured flow channel and measure the amount of birefringence as well as the position of the refractive index axes by using polarizers and a polarization camera. With the help of reference data published in a previous study (Lane, Rode, et al., 2022a), strain rates are derived from the birefringence measurements and compared with numerical simulations. Two flow situations are studied, a plane Poiseuille flow and the flow around a cosine-shaped constriction. The experimentally derived shear rates for the plane Poiseuille flow are consistent with theoretical and computational results. The derived strain rates for the flow around the cosine-shaped constriction show an unexpected asymmetric profile, with the strain rates in the contraction zone being larger than in the expansion zone. The averaged orientation of the CNCs in the flow is linked to the position of the refractive index axes. In the contraction zone, the CNCs tend to align parallel to the flow, whereas in the expansion zone, the CNCs tend to align perpendicular to the flow. The results of this study are discussed in the context of previous, similar studies. The asymmetric strain rate profile around the cosine-shaped constriction is thought to originate from history effects, and the alignment of the CNCs is influenced by extensional rates.