Abstract
A technique for acquiring two-dimensional soot-volume-fraction measurements in laminar flames has been demonstrated. The technique provides a map of very low noise concentration over a range of wavelengths (250-1100 nm). A noise level of 0.0007 in extinction and a spatial resolution of 30-40 microm for soot concentration were achieved with an arc lamp source that was filtered to provide greater spatial coherence and a CCD detector. The broadband arc lamp source also allowed us to avoid the added noise resulting from speckle with coherent laser sources. Beam steering, due to refractive-index gradients in the flame, was measured and compared with theoretical predictions. The optical arrangement to minimize the effect of beam steering is described. As a result the beam steering had no effect on the soot measurements in the flames examined. Flame-transmission maps obtained with this system in an ethylene/air laminar diffusion flame are presented. Tomographic analysis from use of an Abel inversion of the line-of-sight data to obtain radial profiles of soot concentration is described.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
