Two-dimensional honeycomb lattice structure for underwater acoustic cloaking using pentamode materials

Abstract

This research article presents an innovative and novel approach to achieve underwater acoustic cloaking using a two-dimensional honeycomb lattice structure with pentamode materials in the kHz frequency range. Underwater acoustic cloaking holds substantial importance in various applications, such as marine engineering, imaging, and military operations, making the development of an efficient underwater acoustic shell imperative. The proposed cloak consists of a pentamode titanium material honeycomb lattice embedded in an air background, submerged in water. To attain effective camouflage and regulate the phase and energy flow, impedance matching was applied to the overall geometry of the structure. By fine-tuning the structural parameters of the cloaking shell, derived from the effective mass velocity and density for recovering reflected waves, impedance matching with water was ensured. Through simulation calculations and optimization design, the average total scattering cross-section of the acoustic cloak is determined to be 0.1. The results demonstrate that the pentamode material-based cloaking approach is not only suitable and efficient in achieving the cloaking phenomenon but also enhances operator flexibility. The operating frequency bandwidth of the acoustic cloaking system is approximately 8 kHz for lattice constant a = 5 mm. These findings pave the way for further advancements in underwater acoustic cloaking technologies.