Abstract

Fully lamellar Ti-6Al-4V alloys comprise body-centered cubic (BCC) β lamellae in large-sized, hexagonal close-packed (HCP) α colonies and exhibit outstanding toughness. Although α/β interfaces are considered to play a key role in plastic deformation connected to the toughness, the interface effects have not been revealed so far. In this work, we studied underlying deformation mechanisms of interface-related deformation modes at an atomic scale. After the cyclic loading, {1‾102} deformation twins were observed in the vicinity of fatigue crack surfaces. Moreover, the α/β interface structures before and after cyclic loading deformation were characterized via transmission electron microscopy (TEM). The initial α/β interfaces can be described by the terrace ledge kink model, consisting of (01‾10)α||(‾121)β terrace plane and (‾1100)α||(‾101)β ledge plane. TEM investigations reveal that deformation twins nucleate at the α/β interface and the corresponding nucleation is ascribed to the dissociation of basal type dislocations. More importantly, these twins can continuously propagate through multiple β phase lamella. The continuous propagation of twinning is accomplished through double kinking mechanism. In this manner, twinning in α phases and sequential kinking in β phases can effectively release the stress intensification at the crack tip and dissipate plastic work/energy, correspondingly enhancing fracture toughness of fully lamellar Ti-6Al-4V.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.