Twin-Screw Continuous Mixing Can Produce Dry Powder Inhalation Mixtures for Pulmonary Delivery

Abstract

The feasibility of twin-screw corotating extruder as a continuous process mixer to prepare dry powder inhalation (DPI) powders was investigated. Interactive mixtures of 1% micronized budesonide, 0.3% magnesium stearate and 98.7% alpha-lactose monohydrate were manufactured using a Leistritz Nano-16 extruder at various processing conditions. One set of GFM (grooved mixing) elements were included in the screw profile to provide distributive mixing of conveyed powders with the goal of resulting in a homogeneous mixture. Residence time in the twin-screw mixer was modelled to quantify mixing efficiency. Comparative powders were also prepared using either low or high-shear batch mixing to compare the effect of mixing methods on the properties of the budesonide dry powder inhalation formulation. Twin screw mixing results in homogeneous mixtures with aerosol performance comparable to that of high-shear batch mixing. Scanning electron microscopy confirmed that twin screw mixing produces particles with morphology like that of low and high-shear batch mixing. X-ray diffraction (XRD) analysis verified that there was no form change of the drug due to twin-screw processing. Statistical regression was used to probe the relationship between twin screw mixing process parameters such as screw speed and feed rate and aerosol performance. The twin screw mixing process was found to be robust, as no significant differences in aerosol performance were found for various processing parameters.